D-Link DGS-1510/ME Series Reference Manual page 602

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
To display a scenario where the uploading of the config file to the TFTP server failed, because of an incorrect or
missing filename from the source. This error can also be found if the directory, on the source, does not exit.
DGS-1510-28XMP/ME:admin# upload cfg_toTFTP 10.90.90.10 dest_file d:\config.cfg src_file
missing.cfg
Command: upload cfg_toTFTP 10.90.90.10 dest_file d:\config.cfg src_file missing.cfg
No such file or directory.
Fail!
DGS-1510-28XMP/ME:admin#
To upload the attack log:
DGS-1510-28XMP/ME:admin# upload attack_log_toTFTP 10.90.90.10 dest_file d:\attack.txt
Command: upload attack_log_toTFTP 10.90.90.10 dest_file d:\attack.txt
Success.
DGS-1510-28XMP/ME:admin#
73-3 config tftp
Description
This command is used to pre-configure TFTP server and file pathname on the TFTP server.
Format
config tftp {server <ipaddr> | firmware_file <path_filename 64> | cfg_file <path_filename 64> | log_file
<path_filename 64> | attack_log_file <path_filename 64> | certificate_file <path_filename 64> | key_file
<path_filename 64> | tech_support_file <path_filename 64> | debug_error_log_file <path_filename 64> |
sim_firmware_file <path_filename 64> | sim_cfg_file <path_filename 64> | sim_log_file <path_filename 64>}
Parameters
server - (Optional) Specifies the IP address of the TFTP server.
<ipaddr> - Enter the IP address of the TFTP server.
firmware_file - (Optional) Specifies the pathname supports "download/upload firmware_fromTFTP" function.
<path_filename 64> - Enter the pathname supports "download/upload firmware_fromTFTP" function.
cfg_file - (Optional) Specifies the pathname supports "download/upload cfg_fromTFTP" function.
<path_filename 64> - Enter the pathname supports "download/upload cfg_fromTFTP" function.
log_file - (Optional) Specifies the pathname supports "upload log_toTFTP" function.
<path_filename 64> - Enter the pathname supports "upload log_toTFTP" function.
attack_log_file - (Optional) Specifies the pathname supports "upload attack_log_toTFTP" function.
<path_filename 64> - Enter the pathname supports "upload attack_log_toTFTP" function.
certificate_file - (Optional) Specifies the pathname supports "download ssl certificate" function.
<path_filename 64> - Enter the pathname supports "download ssl certificate" function.
key_file - (Optional) Specifies the pathname supports "download ssl certificate" function.
<path_filename 64> - Enter the pathname supports "download ssl certificate" function.
598