D-Link DGS-1510/ME Series Reference Manual page 624

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
Parameters
<ipaddr> - Enter the IP address of the trusted host.
network - Specifies the network address of the trusted network. The form of network address is xxx.xxx.xxx.xxx/y.
<network_address> - Enter the network address used here.
add - Specifies to add interfaces for that trusted host.
delete - Specifies to delete interfaces for that trusted host.
snmp - (Optional) Specifies trusted host for SNMP.
telnet - (Optional) Specifies trusted host for TELENT.
ssh - (Optional) Specifies trusted host for SSH.
http - (Optional) Specifies trusted host for HTTP.
https - (Optional) Specifies trusted host for HTTPs.
ping - (Optional) Specifies trusted host for PING.
all – (Optional) Specifies trusted host for all application.
Restrictions
Only Administrators and Operators can issue this command.
Example
To configure the trusted host:
DGS-1510-28XMP/ME:admin# config trusted_host 10.48.74.121 add ssh telnet
Command: config trusted_host 10.48.74.121 add ssh telnet
Success.
DGS-1510-28XMP/ME:admin#
78-4 show trusted_host
Description
This command is used to display a list of trusted hosts entered on the Switch using the create trusted_host
command above.
Format
show trusted_host
Parameters
None.
Restrictions
None.
620