D-Link DGS-1510/ME Series Reference Manual page 372

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
Format
delete mac_based_vlan {mac_address <macaddr> [vlan <vlan_name 32> | vlanid <vlanid 1-4094>]}
Parameters
mac_address - (Optional) Specifies the MAC address used.
<macaddr> - Enter the MAC address used here.
vlan - (Optional) Specifies the VLAN to be associated with the MAC address.
<vlan_name 32> - Enter the VLAN name here. This name can be up to 32 characters long.
vlanid - (Optional) Specifies the VLAN by VLAN ID.
<vlanid 1-4094> - Enter the VLAN ID here. This value must be between 1 and 4094.
If no parameter is specified, all of the static configured entries will be removed.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To delete a static MAC-based VLAN entry:
DGS-1510-28XMP/ME:admin# delete mac_based_vlan mac_address 00-11-22-33-44-55 vlanid 100
Command: delete mac_based_vlan mac_address 00-11-22-33-44-55 vlanid 100
Success.
DGS-1510-28XMP/ME:admin#
43-3 show mac_based_vlan
Description
This command is used to display the static or dynamic MAC-Based VLAN entry.
Format
show mac_based_vlan {mac_address <macaddr> | [vlan <vlan_name 32> | vlanid <vlanid 1-4094>]}
Parameters
mac_address - (Optional) Specifies the entry that you would like to display.
<macaddr> - Enter the MAC address used here.
vlan - (Optional) Specifies the VLAN that you would like to display.
<vlan_name 32> - Enter the VLAN name here. This name can be up to 32 characters long.
vlanid - (Optional) Specifies the VLAN by VLAN ID.
<vlanid 1-4094> - Enter the VLAN ID here. This value must be between 1 and 4094.
If no parameter is specified, all static and dynamic entries will be displayed.
368