D-Link DGS-1510/ME Series Reference Manual page 381

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
Format
config mld_snooping mrouter_ports_forbidden [vlan <vlan_name 32> | vlanid <vlanid_list>] [add | delete]
<portlist>
Parameters
vlan - Specifies the name of the VLAN on which the forbidden router port resides.
<vlan_name 32> - Enter the VLAN name here. The VLAN name can be up to 32 characters long.
vlanid - Specifies the ID of the VLAN on which the forbidden router port resides.
<vlanid_list> - Enter the VLAN ID list here.
add - Specifies to add the forbidden router ports.
delete - Specifies to delete the forbidden router ports.
<portlist> - Enter a range of ports to be configured.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To set up port 11 as the forbidden router port of the default VLAN:
DGS-1510-28XMP/ME:admin# config mld_snooping mrouter_ports_forbidden vlan default add 11
Command: config mld_snooping mrouter_ports_forbidden vlan default add 11
Success.
DGS-1510-28XMP/ME:admin#
45-5 enable mld_snooping
Description
This command is used to enable MLD snooping on the Switch. When the Switch receives an MLD report packet
from a port, this port will be learned as a member port of the multicast group that the port is reported, and the
router will be a default member of this multicast group. The multicast packet destined for this multicast group will
be forwarded to all the members of this multicast group.
Format
enable mld_snooping
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
377