D-Link DGS-1510/ME Series Reference Manual page 608

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
Parameters
<date ddmthyyyy> - Specifies the system clock date. An example would look like this: '30jun2010'.
<time hh:mm:ss> - Specifies the system clock time. An example would look like this: '12:00:00'.
Restrictions
Only Administrators and Operators can issue this command.
Example
To configure time:
DGS-1510-28XMP/ME:admin# config time 30jun2003 16:30:30
Command: config time 30jun2003 16:30:30
Success.
DGS-1510-28XMP/ME:admin#
74-6 config time_zone
Description
This command is used to configure time zone of the device.
Format
config time_zone {operator [+ | -] | hour <gmt_hour 0-13> | min <minute 0-59>}
Parameters
operator - (Optional) Specifies the operator of time zone.
[+ | -] - Specifies that time should be added or subtracted to or from the GMT.
hour - (Optional) Specifies the hour of time zone.
<gmt_hour 0-13> - Enter the hour value of the time zone here. This value must be between 0 and 13.
min - (Optional) Specifies the minute of time zone.
<minute 0-59> - Enter the minute value of the time zone here. This value must be between 0 and 59.
Restrictions
Only Administrators and Operators can issue this command.
Example
To configure time_zone:
604