D-Link DGS-1510/ME Series Reference Manual page 17

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
DGS-1510-28XMP/ME:admin# logout
Command: logout
**********
* Logout *
**********
Copyright(C) 2015 D-Link Corporation. All rights reserved.
UserName:
2-8 ?
Description
This command is used to display the usage description for all commands or the specific one.
Format
?
Parameters
None.
Restrictions
None.
Example
To get "ping" command usage, descriptions:
DGS-1510-28XMP/ME:admin#? ping
Command: ? ping
Command: ping
Usage: <ipaddr> { times <value 1-255> | timeout <sec 1-99>}
Description: Used to test the connectivity between network devices.
DGS-1510-28XMP/ME:admin#
2-9 clear
Description
The command is used to clear screen.
DGS-1510-28XMP/ME Gigabit Ethernet Switch
Command Line Interface
Firmware: Build 1.00.018
13