DES-3010F/DES-3010FL/DES-3010G/DES-3018/DES-3026 Fast Ethernet Switch Manual
MAC Notification Settings
MAC Notification is used to monitor MAC
addresses learned and entered into the forwarding
database. To globally set MAC notification on the
Switch, open the following window by opening the
MAC Notification Settings in the Administration
folder.
Global Settings
The following parameters may be viewed and
modified:
Parameter
Description
State
Enable or disable MAC notification
globally on the Switch
Interval
The time in seconds between
(sec)
notifications.
History
The maximum number of entries
Size
listed in the history log used for
notification. Up to 500 entries can
be specified.
Port Settings
To change MAC notification settings for a port or
group of ports on the Switch, configure the
following parameters.
Parameter
Description
From...To
Select a port or group of ports to
enable for MAC notification using
the pull-down menus.
State
Enable MAC Notification for the
ports selected using the pull-
down menu.
Click Apply to implement changes made.
Figure 6- 14. MAC Notification Settings
42