D-Link DGS-1510/ME Series Reference Manual page 191

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
interface level has higher priority. In this case, the DHCP server configured on the VLAN will not be used to
forward the DHCP packets.
Format
config dhcp_relay add vlanid <vlan_id_list> <ipaddr>
Parameters
<vlan_id_list> - Enter the VLAN ID list used for this configuration here.
<ipaddr> - Enter the DHCP/BOOTP server IP address used here.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To add a DHCP/BOOTP server 10.43.21.12 to VLAN 1 to 10:
DGS-1510-28XMP/ME:admin# config dhcp_relay add vlanid 1-10 10.43.21.12
Command: config dhcp_relay add vlanid 1-10 10.43.21.12
Success.
DGS-1510-28XMP/ME:admin#
To display the DHCP relay status:
DGS-1510-28XMP/ME:admin# show dhcp_relay
Command: show dhcp_relay
DHCP/BOOTP Relay Status
DHCP/BOOTP Hops Count Limit
DHCP/BOOTP Relay Time Threshold : 0
DHCP Vendor Class Identifier Option 60 State: Disabled
DHCP Client Identifier Option 61 State: Disabled
DHCP Relay Agent Information Option 82 State
DHCP Relay Agent Information Option 82 Check
DHCP Relay Agent Information Option 82 Policy : Replace
DHCP Relay Agent Information Option 82 Circuit ID : Default
DHCP Relay Agent Information Option 82 Remote ID : 00-01-02-03-04-00
Interface Server 1
------------ --------------- --------------- --------------- ---------------
Server VLAN ID List
--------------- ----------------------------------------------------------- 10.43.21.12
1-10
DGS-1510-28XMP/ME:admin#
: Disabled
: 4
: Disabled
: Disabled
Server 2 Server 3
187
Server 4