D-Link DGS-1510/ME Series Reference Manual page 251

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
Parameters
<drive_id> - (Optional) Enter the drive ID, for example, C:.
<pathname> - Enter the file to be moved. The path name can be specified either as a full path name or partial
name. Specifies either as a full path name or partial name. For partial path name, it indicates the file is in the
current directory.
<drive_id> - (Optional) Enter the drive ID, for example, C:.
<pathname> - Enter the new path where the file will be moved. The path name can be. For partial path name, it
indicates the file is in the current directory.
Restrictions
Only Administrators and Operators can issue this command.
Example
To move a file from one location to another location:
DGS-1510-28XMP/ME:admin# move c:/log.txt c:/log1.txt
Command: move c:/log.txt c:/log1.txt
Success.
DGS-1510-28XMP/ME:admin#
29-10 copy
Description
This command is used to copy a file to another file in the file system.
Format
copy {<drive_id>} <pathname> {<drive_id>} <pathname>
Parameters
<drive_id> - (Optional) Enter the drive ID, for example, C:.
<pathname> - Enter the file to be copied. The path name can be specified either as a full path name or partial
name. For partial path name, it indicates the file is in the current directory.
<drive_id> - (Optional) Enter the drive ID, for example, C:.
<pathname> - Enter the file to copy to. The path name can be specified either as a full path name or partial
name. For partial path name, it indicates the file is in the current directory.
Restrictions
Only Administrators and Operators can issue this command.
Example
To copy a file:
247