D-Link DGS-1510/ME Series Reference Manual page 170

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
Parameters
profile_id - Specifies the index of access list profile.
<value 1-5> - Enter the profile ID value here. This value must be between 1 and 5.
all - Specifies that al the access list profiles will be deleted.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To delete CPU access list rules:
DGS-1510-28XMP/ME:admin# delete cpu access_profile profile_id 1
Command: delete cpu access_profile profile_id 1
Success.
DGS-1510-28XMP/ME:admin#
17-3 config cpu access_profile profile_id
Description
This command is used to configure CPU access list entry.
Format
config cpu access_profile profile_id <value 1-5> [add access_id [auto_assign | <value 1-100>] [ethernet
{[vlan <vlan_name 32> | vlan_id <vlanid 1-4094>] | source_mac <macaddr> | destination_mac <macaddr> |
802.1p <value 0-7> | ethernet_type <hex 0x0-0xffff>} | ip {[vlan <vlan_name 32> | vlan_id <vlanid 1-4094>] |
source_ip <ipaddr> | destination_ip <ipaddr> | dscp <value 0-63> | [icmp {type <value 0-255> | code <value
0-255>} | igmp {type <value 0-255>} | tcp {src_port <value 0-65535> | dst_port <value 0-65535> | flag [all |
{urg | ack | psh | rst | syn | fin}]} | udp {src_port <value 0-65535> | dst_port <value 0-65535>} | protocol_id
<value 0-255> {user_define <hex 0x0-0xffffffff>}]} | packet_content {offset_0-15 <hex 0x0-0xffffffff> <hex
0x0-0xffffffff> <hex 0x0-0xffffffff> <hex 0x0-0xffffffff> | offset_16-31 <hex 0x0-0xffffffff> <hex 0x0-0xffffffff>
<hex 0x0-0xffffffff> <hex 0x0-0xffffffff> | offset_32-47 <hex 0x0-0xffffffff> <hex 0x0-0xffffffff> <hex 0x0-
0xffffffff> <hex 0x0-0xffffffff> | offset_48-63 <hex 0x0-0xffffffff> <hex 0x0-0xffffffff> <hex 0x0-0xffffffff> <hex
0x0-0xffffffff> | offset_64-79 <hex 0x0-0xffffffff> <hex 0x0-0xffffffff> <hex 0x0-0xffffffff> <hex 0x0-0xffffffff>} |
ipv6 {class <value 0-255> | flowlabel <hex 0x0-0xfffff> | source_ipv6 <ipv6addr> | destination_ipv6
<ipv6addr>}] port [<portlist> | all] [permit | deny] {time_range <range_name 32>} | delete access_id <value
1-100>]
Parameters
<value 1-5> - Enter the profile ID value here. This value must be between 1 and 5.
add - Specifies that a profile or a rule will be added.
access_id - Specifies the index of access list entry. The range of this value is 1-100.
auto_assign - Specifies that the access ID will automatically be assigned.
<value 1-100> - Enter the access ID here. This value must be between 1 and 100.
ethernet - Specifies that the profile type will be Ethernet.
vlan - (Optional) Specifies the VLAN name used.
<vlan_name 32> - Enter the name of the VLAN here. This name can be up to 32 characters long.
166