Config 802.1X Fwd_Pdu Ports [<Portlist> | All] [Enable | Disable]; Config 802.1X Authorization Attributes Radius [Enable | Disable] - D-Link DGS-1510/ME Series Reference Manual

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
Format
config 802.1x fwd_pdu ports [<portlist> | all] [enable | disable]
Parameters
<portlist> - Enter the list of ports used for the configuration.
all - Specifies that all the ports will be used.
enable - Specifies to enable forwarding EAPOL PDU receive on the ports.
disable - Specifies to disable forwarding EAPOL PDU receive on the ports.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To configure 802.1X fwd_pdu for ports:
DGS-1510-28XMP/ME:admin# config 802.1x fwd_pdu ports 1-2 enable
Command: config 802.1x fwd_pdu ports 1-2 enable
Success.
DGS-1510-28XMP/ME:admin#
4-9 config 802.1x authorization attributes radius
Description
This command is used to enable or disable acceptance of authorized configuration.
When the authorization is enabled for 802.1X's RADIUS authentication, the authorized attributes (for example
VLAN, 802.1p default priority, and ACL) assigned by the RADUIS server will be accepted.
Format

config 802.1x authorization attributes radius [enable | disable]

Parameters
enable - Specifies to enable the authorization attributes. When enabled, the authorization attributes (for example
VLAN, 802.1p default priority, and ACL) assigned by the RADUIS server will be accepted. This is the default.
disable - Specifies to disable the authorization attributes.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To disable to accept the authorized data assigned from the RADIUS server:
41