D-Link DGS-1510/ME Series Reference Manual page 485

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
DGS-1510-28XMP/ME:admin# config qinq inner_tpid 0x9100
Command: config qinq inner_tpid 0x9100
Success.
DGS-1510-28XMP/ME:admin#
59-4 config qinq ports
Description
This command is used to configure the QinQ port's parameters.
Format
config qinq ports [<portlist> | all] {role [uni | nni] | missdrop [enable | disable] | outer_tpid <hex 0x1-0xffff> |
add_inner_tag [<hex 0x1-0xffff> | disable]}(1)
Parameters
<portlist> - Enter the list of ports to be configured here.
all - Specifies that all the ports will be used for the configuration.
role - Specifies the port role in QinQ mode.
uni - Specifies that the port is connecting to the customer network.
nni - Specifies that the port is connecting to the service provider network.
missdrop - Specifies the state of the miss drop of ports option.
enable - Specifies that the miss drop of ports option will be enabled.
disable - Specifies that the miss drop of ports option will be disabled.
outer_tpid - Specifies the outer-TPID of a port.
<hex 0x1-0xffff> - Enter the outer-TPID value used here.
add_inner_tag - Specifies to add an inner tag for ingress untagged packets. If set, the inner tag will be added for
the ingress untagged packets and therefore the packets that egress to the NNI port will be double tagged. If
disable, only the s-tag will be added for ingress untagged packets.
<hex 0x1-0xffff> - Enter the inner tag value used here.
disable - Specifies that the add inner tag option will be disabled.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To configure port list 1-4 as NNI port and set the TPID to 0x88A8:
DGS-1510-28XMP/ME:admin# config qinq ports 1-4 role nni outer_tpid 0x88A8
Command: config qinq ports 1-4 role nni outer_tpid 0x88A8
Success.
DGS-1510-28XMP/ME:admin#
481