D-Link DGS-1510/ME Series Reference Manual page 27

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To create a VLAN with name "v2" and VLAN ID 2:
DGS-1510-28XMP/ME:admin# create vlan v2 tag 2 type 1q_vlan advertisement
Command: create vlan v2 tag 2 type 1q_vlan advertisement
Success.
DGS-1510-28XMP/ME:admin#
3-2 create vlan vlanid
Description
This command is used to create more than one VLANs at a time. A unique VLAN name (e.g. VLAN10) will be
automatically assigned by the system. The automatic assignment of VLAN name is based on the following rule:
"VLAN"+ID. For example, for VLAN ID 100, the VLAN name will be VLAN100. If this VLAN name is conflict with the
name of an existing VLAN, then it will be renamed based on the following rule: "VLAN"+ID+"ALT"+ collision count.
For example, if this conflict is the second collision, then the name will be VLAN100ALT2.
Format
create vlan vlanid <vidlist> {advertisement}
Parameters
vlanid - Specifies the VLAN ID list to be created.
<vidlist> - Enter the VLAN ID list here.
advertisement - (Optional) Specifies the VLAN as being able to be advertised out.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To create some VLANs using VLAN ID:
DGS-1510-28XMP/ME:admin# create vlan vlanid 10-30
Command: create vlan vlanid 10-30
Success.
DGS-1510-28XMP/ME:admin#
23