Fax Receiving Mode; Billing Meter/Print Report - Xerox WorkCentre 7132 User Manual

12 Machine Status

Fax Receiving Mode

Billing Meter/Print Report

318
Downloaded From ManualsPrinter.com Manuals
1.
Select [Password] on the [PDF]
screen.
2.
Enter a password using the
keyboard.
3.
Select [Next].
4.
Re-enter the password.
5.
Select [Save].
This feature allows you to set the fax reception mode: Manual Receive or Auto Receive.
1.
Select [Fax Receiving Mode] on
the [Machine Status] screen.
Manual Receive
Starts receiving a fax or polling after you have answered the call and confirmed it is a
fax.
Auto Receive
Receives a fax automatically.
This section describes the features that allow you to view the billing meter information,
and also specify the output sequence for various reports and lists.
NOTE: The Print Report/List feature is enabled by setting the [Print Report Button]
setting to Enabled in the [Common Settings] > [Reports] feature. For more
information, refer to Reports in the Setups chapter on page 231.
For more information, refer to the following.
Billing Meter – page 319
Print Report/List – page 319
1.
Press the <Machine Status>
button on the control panel.
2.
Select the [Billing Meter/Print
Report] tab.
3.
Select the required option.
Xerox WorkCentre 7132 User Guide