Covers - Xerox WorkCentre 7132 User Manual

3 Copy
[Booklet Creation - Divide Output] Screen

Covers

72
Downloaded From ManualsPrinter.com Manuals
Covers
• Blank Covers - Adds a blank cover to the booklet.
• Printed Covers - Copies the first page of the set of documents onto the cover stock.
Add blank sheets to the set of documents if you want the inside front and back
covers to remain blank.
Paper Tray Settings
Displays the [Booklet Creation - Covers - Paper Tray Settings] screen. Select one of
the presets to specify [Main Body Tray] and [Covers Tray]. The paper loaded in the
trays selected for [Main Body Tray] and [Covers Tray] should be the same size and
orientation. Four presets, including the bypass tray, are available for each, depending
on your machine configuration. For more information on the bypass tray, refer to [Tray
5 (Bypass)] Screen on page 53.
Allows you to subdivide a large booklet into many booklets.
1.
Select [Booklet Creation - Divide
Output] on the [Booklet
Creation] screen.
2.
Select the required option.
3.
Select [Save].
Off
Disables the feature.
On
Subdivides the booklet into subsets. Enter the number of sheets in each subset using
the scroll bars or numeric soft keys.
This feature allows you to add a front and/or back cover to a copy job. If [Printed
Covers] on the [Booklet Creation - Covers] screen is selected, the first original will be
the front cover and the last original will be the back cover.
NOTE: If the machine's memory becomes full while scanning a document with this
feature enabled, follow the instructions on the screen to cancel the job. Delete the
stored documents, or reduce the amount of pages to free some memory and try again.
NOTE: This feature is unavailable when [Uncollated] or [With Separators] is selected
in [Copy Output].
Xerox WorkCentre 7132 User Guide