Scan Defaults - Xerox WorkCentre 7132 User Manual

10 Setups

Scan Defaults

Scanning Color
Original Type
File Format
Lighten/Darken
Contrast
Sharpness
266
Downloaded From ManualsPrinter.com Manuals
Scan-to-FTP/SMB Defaults – page 268
Original Size Defaults – page 268
Output Size Defaults – page 269
Reduce/Enlarge Presets – page 269
Other Settings – page 270
1.
Select [Scan Mode Settings] on
the [System Settings] screen.
2.
Select the required option.
3.
Select [Close].
This feature allows you to configure or change various default settings for the scan
features.
1.
Select [Scan Defaults] on the
[Scan Mode Settings] screen.
2.
Change the required settings.
Use the scroll buttons to switch
between screens.
3.
Select [Close].
Specifies the default for the [Scanning Color] feature on the [General Settings] screen.
Specifies the default for the [Original Type] feature on the [General Settings] screen.
Specifies the default for the [File Format] feature on the [General Settings] screen.
Specifies the default for the [Lighten/Darken] feature on the [Image Quality] screen.
Specifies the default for the [Contrast] feature on the [Image Quality] screen.
Specifies the default for the [Sharpness] feature on the [Image Quality] screen.
Xerox WorkCentre 7132 User Guide