Xerox WorkCentre 7132 User Manual page 256
Hide thumbs
Also See for WorkCentre 7132:
- Service documentation (1726 pages) ,
- User manual (468 pages) ,
- System administration manual (184 pages)
Table of Contents
Advertisement
10 Setups
LDAP Server/Directory Service
256
Downloaded From ManualsPrinter.com Manuals
• Secondary Server IP Address - Specifies the secondary server IP address. This
entry is required only when [By IP Address] is selected on the [Secondary Server
Setup] screen.
• Secondary Sever Name - Specifies the secondary server name. Enter a server
name of up to 255 characters. This entry is required only when [By Server Name] is
selected on the [Secondary Server Setup] screen.
• Secondary Server Port Number - Specifies the secondary server port number.
• Realm Name - Specifies the Kerberos realm name. Enter a realm name up to 64
characters.
Specifies the LDAP servers and address book entry attributes. Use the scroll buttons
to switch between screens.
Primary Server
• Primary Server Setup - Specifies the setup method for the primary server.
• Primary Server IP Address - Specifies the primary server IP address. This entry is
required only when [By IP Address] is selected on the [Primary Server Setup] screen
• Primary Server Name - Specifies the primary server name. Enter a server name of
up to 64 characters. This entry is required only when [By Server Name] is selected
on the [Primary Server Setup] screen.
Primary Server Port Number
Specifies the primary server port number.
Secondary Server
• Secondary Server Setup - Specifies the setup method for the secondary server.
• Secondary Server IP Address - Specifies the secondary server IP address. This
entry is required only when [By IP Address] is selected on the [Secondary Server
Setup] screen.
• Secondary Server Name - sSpecifies the secondary server name. Enter a server
name of up to 64 characters. This entry is required only when [By Server Name] is
selected on the [Secondary Server Setup] screen.
Secondary Server Port Number
Specifies the secondary server port number.
Authentication with SSL
Specifies whether to enable SSL communication when checking for authentication.
Authentication Method
Specifies the authentication method. Select from [Direct Authentication] and
[Authentication of User Attributes].
Xerox WorkCentre 7132 User Guide
Advertisement
Table of Contents
