Xerox WorkCentre 7132 User Manual page 46

3 Copy
Document Feeder
46
Downloaded From ManualsPrinter.com Manuals
The document feeder can hold up to 50 sheets of plain paper (16-32 lb bond or 38-
2
128 g/m ). The document can be any size of 125-297 mm (4.9-11.7 inches) for width
and 115-432 mm (4.5-17 inches) for length, and the standard sizes of A5-A3 (5.5" x
8.5" to 11" x 17") SEF. Make sure the documents are in good condition, and remove all
staples or paper clips before loading. The document feeder senses standard sizes, or
you can manually enter a size using the [Layout Adjustment] tab.
For information on how to copy mixed size originals using the document feeder, refer
to Mixed Sized Originals on page 65.
NOTE: To reduce the risk of document feeder jams, use the document glass to copy
folded or creased documents. Replace folded or creased documents with the new
copy.
NOTE: A paper jam may occur when custom sized originals are loaded in the
document feeder and the original size feature is set to [Auto Detect]. In this case,
entering a custom paper size is recommended. For more information, refer to Original
Size on page 65.
The machine is capable of sequentially scanning mixed size documents using the
document feeder. Align the documents against the top corner of the document feeder.
For information on how to copy mixed size originals using the document feeder, refer
to Mixed Sized Originals on page 65.
1.
Before loading the documents
into the document feeder,
remove all staples and paper
clips.
2.
Insert the documents neatly into
the document feeder, face up.
The first page should be on top
with the headings towards the
back or left of the machine.
3.
Place the stack in the middle of the guides aligning the left edge with the
document feeder tray, and position the guides to just touch the edge of the
documents.
When [Auto] is selected in [Paper Supply], the machine automatically selects an
appropriate tray according to the document size. The selected tray, paper size and
orientation in the selected tray are displayed on the screen.
NOTE: This feature is available when the machine finds an appropriate tray. If there is
no appropriate tray, temporarily use manual selection for the tray or use the bypass
tray. For more information on tray selection, refer to Paper Supply on page 52.
Xerox WorkCentre 7132 User Guide