Xerox WorkCentre 7132 User Manual page 242

10 Setups
Edge Erase - Left & Right Edges
Image Shift - Side 1
Image Shift - Side 2
Image Rotation
Image Rotation Direction
Original Orientation
Copy Output
Uncollated - Separators Tray
Output Destination
Stamp Text
242
Downloaded From ManualsPrinter.com Manuals
Specifies the defaults for left and right margins of the [Edge Erase] feature on the
[Layout Adjustment] screen. Set the margins within a range of 0-50 mm (0-2.0 inches)
using the scroll buttons.
Specifies the default position of [Side 1] in the [Image Shift] feature on the [Layout
Adjustment] screen.
Specifies the default position of [Side 2] in the [Image Shift] feature on the [Layout
Adjustment] screen.
Specifies the default for the [Image Rotation] feature on the [Layout Adjustment]
screen.
Specifies the default for [Image Rotation Direction] in the [Image Rotation] feature on
the [Layout Adjustment] screen.
Specifies the default for the [Original Orientation] feature on the [Layout Adjustment]
screen.
Specifies the default for [Collation] in the [Copy Output] feature on the [Copy] screen.
The options available vary depending on your machine configuration.
Specifies the default for [With Separators]>[Paper Supply] in the [Copy Output] feature
on the [Copy] screen.
Specifies the default tray for output. If the machine is equipped with the finisher, select
[Center Output Tray], [Side Output Tray], or [Finisher Tray].
NOTE: When the staple function is used, the output tray changes to [Finisher Tray]
automatically.
Specifies the default for [Stamp]>[Text] in the [Annotation] feature on the [Output
Format] screen.
Xerox WorkCentre 7132 User Guide