Xerox WorkCentre 7132 User Manual page 368

14 Maintenance
Inserting the New Fuser Unit
368
Downloaded From ManualsPrinter.com Manuals
4.
Remove the two screws
securing the fuser unit by
rotating them anticlockwise.
5.
Grip the fuser unit by the two
ring tabs and remove the fuser
unit from the machine.
1.
Remove the new fuser unit from
its box. Holding the unit by the
two ring tabs, insert the unit into
the machine.
2.
Push the unit into the machine
until it locks into position.
Xerox WorkCentre 7132 User Guide