Group Send - Xerox WorkCentre 7132 User Manual

10 Setups

Group Send

294
Downloaded From ManualsPrinter.com Manuals
With [Server] selected:
Item
Recipient Name
Transfer Protocol
Server Name/IP Address
Shared Name (SMB Only)
Save In
User Name
Password
Port Number
This feature allows you to group multiple Address Numbers. Documents are then sent
to all Address Numbers registered under a group number when the group number is
specified. You can register Address Numbers under up to 50 group numbers; each
group can contain up to 20 Address Numbers.
1.
Select [Group Send] on the
[Setup Menu] screen.
2.
Select a group number.
3.
Select [Create/Delete].
4.
Enter a 3-digit Address Number
using the numeric keypad on the control panel.
5.
Select [Add].
NOTE: You can use an asterisk to specify multiple Address Numbers at a time. If you
enter "01*", Address Numbers from 010 to 019 are specified. If you enter "***", all the
Address Numbers are specified.
Description
Enter a recipient name (up to 18
characters).
Select FTP or SMB as the transfer
protocol.
Enter the name and IP address of the
destination server.
Enter a name assigned for sharing a
folder.
Specify the location (or path) of the
directory for saving documents.
Enter a user name if required by the
destination server.
Enter a password if required by the
destination server.
Select an appropriate port number to be
used.
Default
FTP
Xerox WorkCentre 7132 User Guide
-
-
-
-
-
-
-