Preset Repeat Image - Xerox WorkCentre 7132 User Manual

3 Copy

Preset Repeat Image

78
Downloaded From ManualsPrinter.com Manuals
Control Number
Prints sequential control numbers on each copy set. The [Watermark - Control Number]
screen is displayed and the following options are available:
• Off - Disables the feature.
• On - Enables the feature. Specify a start number between 1 and 999 using the scroll
bars or numeric soft keys.
Text
Prints one of the predetermined phrases on the copies. The [Watermark - Text] screen
is displayed and the following options are available:
• Off - Disables the feature.
• On - Enables the feature. Select from six predetermined phrases set up by the Key
Operator.
Date & Time
Prints the date and time that the copy job started on each of the copies. The
[Watermark - Date and Time] screen is displayed. Select [On] to enable the feature.
Serial Number
Prints the serial number of the machine on the copies. The [Watermark - Serial
Number] screen is displayed. Select [On] to enable the feature.
This feature allows you to reduce and repeat the image from an original onto one sheet
of paper. The reduced images can then be cut into multiple sheets.
1.
Select [Preset Repeat Image] on
the [Output Format] screen.
2.
Select the required option.
3.
Select [Save].
Single Image
Disables the feature.
2 images
Places two preset images on one sheet of paper.
4 images
Places four preset images on one sheet of paper.
8 images
Places eight preset images on one sheet of paper.
Xerox WorkCentre 7132 User Guide