Other Settings - Xerox WorkCentre 7132 User Manual

10 Setups

Other Settings

Scan Service
Memory Full Procedure
Maximum Stored Pages
Saturation
Background Suppression Level
Shadow Suppression Level
Color Space
270
Downloaded From ManualsPrinter.com Manuals
Variable %
Specifies the reduce/enlarge ratio set using the scroll bars from 25% to 400% in 1%
increments.
This feature allows you to configure or change other machine settings specific to the
scan features.
1.
Select [Other Settings] on the
[Scan Mode Settings] screen.
2.
Change the required settings.
Use the scroll buttons to switch
between screens.
3.
Select [Close].
Specifies whether to enable the scanner function.
Specifies the default process to execute if the hard disk becomes full while reading
documents. A message asking how to process the data read up to that point is
displayed. You can predefine a processing method to be performed after the message
has been displayed for a specified period. If you select [Cancel Job], the data will be
discarded. If you select [Run Job], the data read up to that point will be processed.
Specifies the maximum number of pages to be stored in memory through scanning.
Select a number in the range from 1 to 999.
Specifies the color saturation when scanning a full-color document. Scans are
automatically adjusted.
Specifies the background suppression level when scanning a document in color.
Specifies the shadow suppression level when scanning a document in color.
Specifies whether to display the color space feature. Select [Enabled] to display the
[Color Space] feature on the [Image Quality] screen for the [E-mail], [Scan to Mailbox],
[Scan to FTP/SMB], and [Network Scanning] functions.
Xerox WorkCentre 7132 User Guide