Xerox WorkCentre 7132 User Manual page 291

Xerox WorkCentre 7132 User Guide
Downloaded From ManualsPrinter.com Manuals
NOTE: Depending on the selection for [Address Type] in step 4, the following items
are displayed on the screen.
With [Fax] selected:
Item
Fax Number
Recipient Name
Index
Relay Station Setup
Communication Mode
Resolution
Cover Note
Maximum Image Size
Delayed Start
Description
Enter a fax number (up to 128 digits).
Enter a recipient name (up to 18
characters).
Enter a single alphanumeric character to
use as a keyword for searching the
Address Book.
Specify whether or not the registered
Address Number is to be identified as an
initiating relay broadcast station when the
machine is used as a relay broadcast
station.
NOTE: Before using the Relay Broadcast
feature, enter the Address Numbers for
initiating stations regardless of the
initiating method from the stations.
Select a communication mode from
among [G3 Auto] and [F4800].
Select a resolution level to be used for
transmission, from among [Panel],
[Standard], [Fine], [Superfine (400dpi)],
and [Superfine (600dpi)]. With [Panel]
selected, the resolution level selected on
the control panel is used.
Specify whether or not to attach a Cover
Note. If you select [On], then select a
comment for a recipient and/or a sender.
NOTE: Unless registered beforehand,
comments cannot be selected. For
information on how to register comments,
refer to Comments on page 295.
Select the maximum image size,
depending on recipients' paper size, from
among [A3], [B4], and [A4]; or among [8.5
x 11"], B4, and [11 x 17"] (depending on
the country).
Select whether or not to specify the
transmission start time. If you select [On],
then specify the start time.
Setup Menu
Default
-
-
-
Off
G3 Auto
Panel
Off
11 x 17"
Off
291