Comments; Paper Size/Type - Xerox WorkCentre 7132 User Manual

Comments

Paper Size/Type

Xerox WorkCentre 7132 User Guide
Downloaded From ManualsPrinter.com Manuals
NOTE: To delete a registered Address Number in a group, enter the Address Number,
and then select [Delete].
NOTE: If a recipient's name and number of the Address Book is modified after
assignment to a new job flow, those changes are not reflected in the job flow, which
can result in documents being sent to the previous destination. The job flow must also
be updated in order to send documents to the correct destination.
This feature allows you to register a comment to be used when attaching a cover note.
You can register up to 50 comments; each comment can include up to 18 alphanumeric
characters.
1.
Select [Comments] on the
[Setup Menu] screen.
2.
Change the required settings.
3.
Select [Close].
This feature allows you to specify the size and type of paper loaded in the paper trays,
and specifies the paper tray handling for color output features. The paper trays
available vary depending on your machine configuration.
1.
Select [Paper Size/Type] on the
[Setup Menu] screen.
2.
Change the required settings.
3.
Select [Close].
Paper Size
Specifies automatic detection of the paper size for trays 1 to 3 using the tray guide
levers. If the guide levers in the paper tray are not in the correct position for the size of
paper loaded in the tray, a size error will occur. This setting is not available for Tray 5
(Bypass).
Paper Type
Specifies the type of paper in the paper tray from a list of supported paper types,
including the custom paper names 1 to 5.
Auto Paper by Output Color
Specifies the Auto Tray Switching conditions for the paper tray for the output color
setting. For example, this feature allows you to load one tray with one type of paper for
color output only, and another for black and white output only. This setting is not
available for Tray 5 (Bypass).
Setup Menu
295