Original Size - Xerox WorkCentre 7132 User Manual

5 Scan/E-mail

Original Size

138
Downloaded From ManualsPrinter.com Manuals
Top Page then Bottom
Scans pages of an open book in the direction from top to bottom.
• Both Pages - Scans both the left and right pages.
• Top Page Only - Scans the top pages only.
• Bottom Page Only - Scans the bottom pages only.
Binding Erase
Erases the center binding area of the book that tends to be shadowed due to the fold
in the pages. Use the scroll buttons to specify the area to be erased from the center of
an open book within the range of 0-50 mm (0.0-2.0 inches) in 1 mm (0.1) inch
increments.
This feature allows you to set the size of the document automatically, to select from a
list of preset sizes, or to mix different size documents. If you select a preset size,
documents will be scanned according to the specified size regardless of their actual
size.
1.
Select [Original Size] on the
[Layout Adjustment] screen.
2.
Select the required options.
3.
Select [Save].
Auto Detect
Automatically detects the size of standard sized documents.
Manual Size Input
Allows you to select the input size from the 11 preset standard sizes in portrait or
landscape orientations, or select a custom size within the ranges of 15-297 mm (0.6-
11.7 inches) for length and 15-432 mm (0.6-17.0 inches) for width. The presets are set
up by the Key Operator.
Mixed Sized Originals
Allows you to scan more than one original size document. The machine senses the
mixed sized originals automatically, and scans each document at the same size as the
originals. Load different size documents, with top left corners aligned, into the
Document Feeder.
NOTE: 5.5 × 8.5" and A5 originals must be loaded in portrait orientation.
Xerox WorkCentre 7132 User Guide