Keyboard Input Restriction; Data Encryption - Xerox WorkCentre 7132 User Manual

Size
B6 LEF
B6 SEF
Millimeters/Inches

Keyboard Input Restriction

Operation of Up/Down Buttons
Display Consumables Screen
Overwrite Hard Disk

Data Encryption

Service Representative Restricted Operation
Xerox WorkCentre 7132 User Guide
Downloaded From ManualsPrinter.com Manuals
Width Length
(mm) (mm)
182.0 128.0
128.0 182.0
Specifies [Millimeters] or [Inches] as the unit for entering document or scan sizes.
Specifies whether the machine is to allow entry of standard ASCII characters only, or
characters including those specific to the selected language. Select [On (Standard
ASCII Only)] to display standard ASCII characters only on the keyboard screen.
Specifies whether the machine is to allow the up and down buttons (scroll buttons) on
the touch screen to provide fast scrolling when they are pressed continuously.
Specifies whether or not to display the consumables screen, and the event that causes
the machine to display the consumables screen.
Specifies whether or not to enable overwriting the hard disk. If enabled, random data
will be written to the disk area released by the data deletion to avoid illegal data
retrievals from the hard disk. You can select the number of overwrite passes from one
time or three times. This also overwrites temporarily saved data such as copy
documents.
Specifies whether to enable encoding when data is saved to RAM, NV-RAM, backed
up memory chips, or the hard disk of the machine. Enter a 12-digit encoding code using
the screen keyboard. The default encoding code is "111111111111". When the setting
is changed, the machine needs to be switched off and then on to make it effective. Note
that all data corresponding to the encoding then will be initialized.
NOTE: Encrypted data cannot be recovered if a problem occurs in the hard disk.
Specifies whether the Service Representative has full access to the security features
of the machine, including the ability to change Key Operator settings.
Tray 1-3 (except for TTM)
Common Settings
Tray 2, 3 (TTM)
237