Xerox WorkCentre 7132 User Manual page 274

10 Setups
Rotate 90 degrees
Mixed Sized Originals Scan Mode
Sender ID
Save Undelivered Faxes
Save Cancelled Faxes
Saved Faxes - Auto Delete
Transmission Interval
Batch Send
Manual Send/Receive Default
Fax Receiving Mode
Border Limit
274
Downloaded From ManualsPrinter.com Manuals
Specifies whether to rotate the image to be sent automatically without reducing the
image size as far as possible when you select [Auto %] in the [Reduce/Enlarge] feature.
Specifies when scanning the document contains the mixed paper sizes.
Specifies whether to notify the remote machine of the machine's G3-ID (fax number)
when you send documents with G3 in the [Communication Mode].
Specifies whether to save fax documents that could not be sent. Select [Yes] to display
the resent feature in the [Stored Documents] tab on the [Job Status] screen, from where
you can resend the fax document.
Specifies whether to store fax documents where the fax transmission was forcibly
cancelled.
Specifies whether to automatically delete stored documents.
Specifies the period between transmissions within the range of 3 to 255 seconds using
the scroll buttons or the numeric keypad on the control panel. The longer the
transmission interval, the longer the total time spent for operation, but the machine can
receive faxes during the standby time.
Specifies whether to send pending documents to an identical destination as a batch
with a single transmission thereby reducing telephone charges.
Specifies the default for whether the [Manual Receive] or [Manual Send] button is to be
selected when you use the [On-Hook] feature.
Specifies the default for fax reception mode. Select from [Auto Receive] and [Manual
Receive].
Specifies the value to divide a document onto two pages when the received documents
are longer than the loaded paper size. Enter a value within the range of 0-127 mm (0-
Xerox WorkCentre 7132 User Guide