Xerox WorkCentre 5845 Quick Manual

®
Xerox WorkCentre™ 5845/5855/5865/5875/5890
How to make a copy
Control panel
1
2
Services Home
1
Job Status
2
Document feeder option
1. Load your documents face up in the document feeder input tray. Adjust the guide to just touch the documents
feeder. Place the document face down onto the document glass and register it to the arrow at the top left corner. Close the document feeder.
2. Press the Clear All (AC) button to cancel any previous screen programming selections.
Services Home
3. Press the
Copy
4. Select the button on the touch screen.
5. If required, select the Copy
6. Select any options required.
7. Enter the number of prints required using the numeric keypad on the Control Panel.
Start
8. Press the button on the Control Panel to scan the original.
©2012 Xerox Corporation. All rights reserved. XEROX®, XEROX and Design® are trademarks of Xerox Corporation in the U.S. and/or other countries.
IG120003
3
3
4
OR
button on the Control Panel.
tab. This is usually the active tab when the Copy service opens.
Touch Screen
Start
Document glass option
5
4
Clear All
5
Stop
6
OR lift up the document
For more information
Please refer to: user guides - available
via
http://www.support.xerox.com
6