Paper Supply - Xerox WorkCentre 7132 User Manual

Paper Supply

Xerox WorkCentre 7132 User Guide
Downloaded From ManualsPrinter.com Manuals
NOTE: The standard sizes of documents that can be detected vary depending on the
paper size table specified by the Key Operator. For information on setting the paper
size table, refer to Paper Size Settings in the Setups chapter on page 234.
NOTE: The standard sizes of documents that can be detected vary depending on the
paper size table specified by the Key Operator. For information on setting the paper
size table, refer to Paper Size Settings in the Setups chapter on page 234.
Trays 1, 2 & 3 (Two Tray Module)
Capacity: 520 sheets of 80 g/m
Paper Weights: 60 to 105 g/m
Paper Sizes: For width: 148 to 297 mm (5.8 to 11.7") / for length: 210 to 432 mm (8.2
to 17.0").
Auto Size Sensing: Yes
*: Depending on the type of paper used and the operating environment, paper may not
feed to the machine properly or print quality may be negatively affected.
Tray 5 (Bypass)
Capacity: Approximately 97 sheets of 80 g/m
**: Using standard paper 4200 3R2047.
NOTE: The paper stack height must not exceed 10 mm (0.4 inches).
Paper Weight: 60 to 216* g/m
Standard Paper Sizes: For width: 128 to 297 mm (5.0 to 11.7") / for length: 99 to 432
mm (3.9 to 17.0").
Custom Paper Sizes: For width: 89 to 297 mm (3.5 to 11.7") / for length: 99 to 432 mm
(3.9 to 17.0").
Auto Size Sensing: Yes
Tray 2, 3 (Tandem Tray Module)
Capacity:
Tray 2 (Left-hand tray): approximately 900 sheets of 80 g/m
Tray 3 (Right-hand tray): approximately 1,180 sheets of 80 g/m
2
Paper Weight: 80 g/m
Paper Sizes: B5 LEF/A4 LEF/7.25 × 10.5" LEF/8.5 × 11" LEF
Paper Weight: 60 to 216* g/m
2
(20 lb bond) paper per tray
2
for Tray 1 and 60 to 216* g/m
2
2
(20 lb bond) paper
2
2
for Trays 2 and 3
(20 lb bond**) paper
2
(20 lb bond) paper
2
(20 lb bond) paper
Paper Supply
435