Scan-To-Ftp/Smb Defaults; Original Size Defaults - Xerox WorkCentre 7132 User Manual
Hide thumbs
Also See for WorkCentre 7132:
- Service documentation (1726 pages) ,
- User manual (468 pages) ,
- System administration manual (184 pages)
Table of Contents
Advertisement
10 Setups
Scan-to-FTP/SMB Defaults
Transfer Protocol
Original Size Defaults
Scan Size 1 to 11
268
Downloaded From ManualsPrinter.com Manuals
This feature allows you to configure or change the default settings for scanning and
sending documents to specified destinations through the FTP or SMB protocol.
1.
Select [Scan-to-FTP/SMB
Defaults] on the [Scan Mode
Settings] screen.
2.
Change the required settings.
3.
Select [Close].
Specifies the default transfer protocol.
This feature allows you to configure or change the scan size buttons on the [Original
Size] feature on the [Layout Adjustment] screen.
1.
Select [Original Size Defaults]
on the [Scan Mode Settings]
screen.
2.
Change the required settings.
Use the scroll buttons to switch
between screens.
3.
Select [Close].
A/B Series Size
Specifies standard document sizes in A/B series size. Use the scroll buttons to switch
between screens.
Inch Size
Specifies standard document sizes in inches. Use the scroll buttons to switch between
screens.
Others
Specifies other miscellaneous sizes. Use the scroll buttons to switch between screens.
Variable Size
Specifies a user-defined size set using the scroll buttons.
Xerox WorkCentre 7132 User Guide
Advertisement
Table of Contents
