Xerox WorkCentre 7132 User Manual page 201
Hide thumbs
Also See for WorkCentre 7132:
- Service documentation (1726 pages) ,
- User manual (468 pages) ,
- System administration manual (184 pages)
Table of Contents
Advertisement
Xerox WorkCentre 7132 User Guide
Downloaded From ManualsPrinter.com Manuals
Feature
Protocol Settings
HTTP
Allows you to configure the HTTP protocol settings as follows.
Port Number – Enter the port number that receives requests from the
browser.
Maximum Sessions – Enter the maximum number of sessions
between 1 and 15.
Connection Time-Out – Allows you to specify the connection time-out
period when transmission fails.
UPnP
Allows you to specify the port number for UPnP.
Port Number – Specify the UPnP port number.
SSDP
Allows you to configure the SSDP protocol settings as follows.
Valid Advertising Period – Specify the time during which the
advertising period remains valid.
Maximum TTL – Specify the maximum TTL (time to live).
LDAP
Allows you to configure the LDAP protocol settings as follows.
LDAP Server Address – Enter the LDAP server address.
Port Number – Specify the LDAP port number.
Web DAV
Allows you to configure the Web DAV protocol settings as follows.
Port Number – Specify the Web DAV port number.
Bonjour
Allows you to configure the Bonjour protocol settings as follows.
Host Name – Enter the host name.
Printer Name – Specify the printer name.
Emulation Settings
Print Mode
Allows you to specify the type of printer language to use when a print
job is sent using USB, EtherTalk, SMB, NetWare, LPD, IPP, etc. Only
the enabled protocol will be displayed.
Auto – Allows you to set the machine so that it will automatically
determine and use the most suitable language to print data received
from the host device.
PostScript – Sets PostScript as the printer language.
HP-GL/2 – Sets HP-GL/2 as the printer language.
PCL – Sets PCL as the printer language.
TIFF – Sets TIFF as the printer language.
HexDump – Sets a hexadecimal dump as the raw language.
JCL – Allows you to enable or disable JCL. JCL is a command
independent of printer languages. You can specify the printer
language to use for the next job regardless of the printer language
that is currently being used.
Setting items
Properties
201
Advertisement
Table of Contents
