Poster; Repeat Image - Xerox WorkCentre 7132 User Manual

Poster

Repeat Image

Xerox WorkCentre 7132 User Guide
Downloaded From ManualsPrinter.com Manuals
This feature allows you to divide and enlarge an original document to copy the image
onto multiple sheets of paper. You can then paste them all together to make one large
poster.
NOTE: This feature is unavailable when [Collated] or [Auto Output] is selected.
1.
Select [Poster] on the [Output
Format] screen.
2.
Select the required option.
3.
Select [Save].
NOTE: The machine automatically overlaps partitioned images when copying to allow
for cutting and pasting. The overlap width is set to 10 mm (0.4 inch).
No Posters
Disables the feature.
Output Size
Allows you to select the size of poster you want to make from the presets that are listed
on the touch screen. The machine automatically calculates the magnification, and
decides how many sheets are needed for the job.
Enlargement %
Use the scroll buttons to select the magnification rates for the length and width of a
poster. The range can be set between 100-400% in 1% increments. The machine
automatically decides how many sheets are needed for the job.
Paper Tray Settings
Displays the [Poster - Paper Tray Settings] screen. Select one of the presets on the
screen to specify the tray for the job. Four presets, including the bypass tray, are
available, depending on your machine configuration. For more information on the
bypass tray, refer to [Tray 5 (Bypass)] Screen on page 53.
This feature allows you to print an original image repeatedly onto one sheet of paper.
1.
Select [Repeat Image] on the
[Output Format] screen.
2.
Select the required option.
3.
Select [Save].
Single Image
Disables the feature.
Output Format
75