Fax Defaults - Xerox WorkCentre 7132 User Manual

10 Setups
General Settings - 2nd Column
Address Book Default
Transmission Screen

Fax Defaults

Lighten/Darken
Original Type
Resolution
Mixed Sized Originals
Transmission Report
272
Downloaded From ManualsPrinter.com Manuals
Specifies the feature to be displayed in the second column on the [General Settings]
screen when you select the fax/Internet Fax feature. This allows you to access
commonly used features quickly.
Specifies the default address book entry number to display at the top of the [Address
Book] screen. Set the key number within the range of 1 to 500 using the scroll buttons
or the numeric keypad on the control panel.
Specifies whether to display the transmission status while sending documents.
This feature allows you to set the default for each fax/Internet Fax feature. The default
set here returns when the power is switched on, power saver mode is cancelled, or the
<Reset> button is pressed. If you set a default for the functions you frequently use, you
can quickly send documents without changing the settings each time.
1.
Select [Fax Defaults] on the [Fax
Mode Settings] screen.
2.
Change the required settings.
Use the scroll buttons to switch
between screens.
3.
Select [Close].
Specifies the default for the [Lighten/Darken] feature on the [General Settings] screen.
Specifies the default for the [Original Type] feature on the [General Settings] screen.
Specifies the default for the [Resolution] feature on the [General Settings] screen.
Specifies the default for the [Mixed Sized Originals] feature on the [Layout Adjustment]
screen.
Specifies the default for the [Transmission Report] feature on the [Transmission
Options] (Fax) screen.
Xerox WorkCentre 7132 User Guide