Adjusting Ringer Volume; Receiving Automatically In Fax Mode - Xerox WorkCentre 490cx User Manual

Adjusting Ringer Volume

The ringer volume can be adjusted according to a suitable level. The
selections are LOW, MED, or HIGH.
1
Press the Menu
Then press the Start
displayed. Press the Start
2
Use the Up
3
Press the Clear/Stop

Receiving Automatically in FAX Mode

1
Press the Receive Mode
2
When a fax call comes in, the machine answers on the designated ring
and receives the fax automatically.
Note: To change the number of rings before the machine answers an
incoming call, see Selectable Options on page 1-62.
button, then press the 0 + 4 buttons on the keypad.
button. Ringer volume is the first item
button.
or Down button to set the desired loudness.
button twice to accept and exit.
button until the display indicates FAX.
Reception Modes 4-5
4