Local Terminal Information - Xerox WorkCentre 7132 User Manual

10 Setups
Original Size 1 to 11

Local Terminal Information

Local Name
Company Logo
Machine Password
278
Downloaded From ManualsPrinter.com Manuals
A/B Series Size
Specifies standard document sizes in A/B series size. Use the scroll buttons to switch
between screens.
Inch Size
Specifies standard document sizes in inches. Use the scroll buttons to switch between
screens.
Others
Specifies other miscellaneous sizes. Use the scroll buttons to switch between screens.
This feature allows you to register or change the local terminal information.
1.
Select [Local Terminal
Information] on the [Fax Mode
Settings] screen.
2.
Change the required settings.
Use the scroll buttons to switch
between screens.
3.
Select [Close].
Specifies the local name so that the remote machine can identify your machine. Enter
up to 20 characters using the screen keyboard on the touch screen. The local name
will be shown in the display or communication management report of the destination.
For information on the screen keyboard, refer to Keyboard in the Fax/Internet Fax
chapter on page 92.
Specifies the sender name (company logo). Enter up to 30 characters using the screen
keyboard on the touch screen. The sender name is printed in the [Send Header] or
[Cover Note].
Specifies the password to restrict the remote machines which send documents. By
setting a machine password, your machine can accept receiving or polling only from
remote machines that send a correct machine password in F Code. Enter up to 20
digits using the screen keyboard on the touch screen. Permissible characters are 0 to
9, *, #, and <space>. When using this feature, you cannot receive documents from
remote machines without the F Code function.
Xerox WorkCentre 7132 User Guide