Sample Set - Xerox WorkCentre 7132 User Manual

Sample Set

Xerox WorkCentre 7132 User Guide
Downloaded From ManualsPrinter.com Manuals
• Chapter Start - Automatically
splits each batch of originals into
chapters, starting on a new page.
Using the [Multiple-Up - New
Page] option sets whether to print
the first page in each stack of
originals on a new page or on the same page as the previous original when the
Multiple-Up feature is selected.
• Separators - Automatically splits
each batch of originals into
chapters with a separator page
between each chapter. Select
[Separators], and specify the tray
containing the blank page
separators. Four presets, including the bypass tray, are available, depending on
your machine configuration. For more information on the bypass tray, refer to [Tray
5 (Bypass)] Screen on page 53.
Change Settings
Allows you to change the settings on the [Copy] screen before scanning the next
section. Press the <Start> button on the control panel to start scanning.
Cancel
Cancels the build job process.
Start
Starts scanning the next section.
This feature allows you to print one set of the job to check the output is correct, prior to
printing the entire job. You can choose whether or not to print more sets after checking
the print result.
1.
Select [Sample Set] on the [Job
Assembly] screen.
2.
Select the required option.
3.
Select [Save].
Off
Disables the feature.
On
Enables the feature. After copying one set, the job is suspended. Select [Start] to copy
the remaining sets or [Stop] to stop the job.
NOTE: Copies produced by [Sample Set] are counted towards the total copy count.
Job Assembly
81