Watermark - Xerox WorkCentre 7132 User Manual

Tray 5 (Bypass) - Paper Size Defaults
Auto Tray Switching

Watermark

Xerox WorkCentre 7132 User Guide
Downloaded From ManualsPrinter.com Manuals
Heavyweight 2
Specifies Heavyweight 2A to 2D and Special grades.
Specifies the paper sizes assigned to the 11 buttons that are listed in [Standard Size]
for Tray 5.
A/B Series Size
Specifies standard document sizes in A/B series size. Use the scroll buttons to switch
between screens.
Inch Size
Specifies standard document sizes in inches. Use the scroll buttons to switch between
screens.
Others
Specifies other miscellaneous sizes. Use the scroll buttons to switch between screens.
Variable Size
Specifies a user-defined size set using the scroll buttons.
Specifies whether to enable Auto Tray Switching. For more information on Auto Tray
Switching, refer to Auto Tray Switching in the Paper and Other Media chapter on
page 212.
Enable during Auto Paper
Specifies whether to enable Auto Tray Switching only when [Auto] is selected for Paper
Supply.
Always Enable
Specifies whether to enable Auto Tray Switching no matter which option is selected for
Paper Supply.
This feature allows you to set the defaults for date and text information which can be
added to the output as a watermark, for document management control.
1.
Select [Watermark] on the
[Common Settings] screen.
2.
Change the required settings.
Use the side tabs to switch
between screens.
3.
Select [Close].
Common Settings
227