Loading Staples; Loading Staples In The Office Finisher (Optional) - Xerox WorkCentre 7132 User Manual

Loading Staples

Loading Staples in the Office Finisher (Optional)

Xerox WorkCentre 7132 User Guide
Downloaded From ManualsPrinter.com Manuals
The Office Finisher contains an automatic stapler. The stapler cartridge contains 5,000
staples. When the machine runs out of the staples, a message is displayed on the
touch screen. When this message is displayed, load a new staple case into the staple
cartridge.
NOTE: Load the correct staple case specified for the product model of the machine.
1.
Open the front cover of the
Office Finisher.
2.
Hold the staple cartridge by its
lever as shown in the diagram,
and move the staple cartridge to
the right towards you.
3.
Lift up to remove the staple
cartridge.
4.
Press in both sides of the staple
cartridge marked PUSH so that
the cartridge case will rise up.
NOTE: If there are still staples inside
the staple case, the case will not rise
up.
Loading Staples
373