Enter The Quantity; Start The Copy Job - Xerox WorkCentre 7132 User Manual

3 Copy

3. Enter the Quantity

4. Start the Copy Job

48
Downloaded From ManualsPrinter.com Manuals
NOTE: If the Authentication feature is enabled, you may be required to enter the user
ID and password (if one is set up). If you need assistance, contact the Key Operator.
3.
Select the button for the feature required. If [More] is selected, select [Save] to
confirm the selected feature or [Cancel] to return to the previous screen.
If necessary, select one of the tabs, and configure the copy settings. For information on
the individual tabs, refer to the following.
Copy – page 50
Image Quality – page 56
Layout Adjustment – page 63
Output Format – page 70
Job Assembly – page 79
The maximum copy quantity is 999.
1.
Use the numeric keypad to enter
the number of copies required.
The number entered is
displayed in the upper right
hand corner of the touch screen.
NOTE: To cancel an incorrect entry,
press the <C> button, and enter the
correct quantity.
1.
Press the <Start> button. Each
document is scanned. The
number of copies remaining is
displayed in the upper right
hand corner of the touch screen.
While copying, if the document feeder or document glass is ready, because the
machine is equipped with the hard disk, you can scan the next document or program
the next job. While the machine is warming up, you can also program the next job.
<C> button
<Start> button
Xerox WorkCentre 7132 User Guide