Advanced Fax Features - Fax; Polling - Xerox WorkCentre 7132 User Manual

Advanced Fax Features - Fax

Polling

Xerox WorkCentre 7132 User Guide
Downloaded From ManualsPrinter.com Manuals
This section describes the advanced features available for fax transmissions. For
information, refer to the following.
Polling – page 111
Store for Polling – page 112
On-hook (Manual Send/Receive) – page 113
1.
Press the <All Services> button
on the control panel.
2.
Select [Fax] on the touch
screen.
3.
Select the [Advanced Fax
Features] tab.
4.
Select the required feature.
This feature allows you to retrieve a document from a remote machine, referred to as
"polling". The remote machine information is entered using the same method for
sending faxes, but the [Polling] option is used to initiate retrieving the fax from the
remote machine. You must know the mailbox number and the password (if set up) of
the remote machine to retrieve the document.
NOTE: To poll a document from a remote machine, the remote mailbox feature must
be enabled. For more information, refer to Remote Mailbox on page 108.
NOTE: The DTMF (dual tone multi-frequency) method and F Code (ITU-T
subaddress) method can be also used to poll a document from a remote machine. For
more information, refer to Special Characters on page 93 or F Code on page 109.
1.
Select [Polling] on the
[Advanced Fax Features]
screen.
2.
Select the required option.
3.
Select [Save].
Off
Disables the feature.
On
Enables polling from a remote machine.
Advanced Fax Features - Fax
111