Area Codes - Siemens Gigaset E365 Manual

First steps
Date and time
Setting the time format
You can set the date/time to the 12-hour
format (12-hour display and the MM/DD/
YY date format, factory settings) or to the
24-hour format (24-hour display and the
DD/MM/YY date format).
¢ ¢
Settings
§Menu§ §OK§
¢ ¢
Time Format
§OK§
¢
24 Hour Clock or 12 Hour Clock
(‰ = on)
Setting the date and time
¢ ¢
Settings
§Menu§ §OK§
¢ ¢
Set Date/ Time
§OK§
~
Enter the month, day and year
using 6 digits and then press
. Use q to move between
§OK§
the fields.
~
Enter hours and minutes using
4 digits (e.g. 0 7 1 5 for 07:15)
and press
Use q to move between the
fields.
12-hour time format:
Press
§am/pm§
am and pm.
Once the phone is registered and the
time set, the idle display looks as shown
on page 1.
14
¢
Date/Time
¢
§OK§
¢
§OK§
¢
Date/Time
¢
§OK§
.
§OK§
to switch between

Area codes

To call back a caller using the incoming
calls list (page 25), your phone's area
code ("local area code") must be stored. If
your phone is in a "multiple area code"
area, the extra codes for this area must
also be stored.
Local Area Code
¢ ¢
Settings
§Menu§ §OK§
¢ ¢
Local Area Code
¢
§OK§
Extra Codes
¢ ¢
Settings
§Menu§ §OK§
¢ ¢
~ (Enter number)
Extra Codes
¢
§OK§
Repeat the above steps until all extra
codes for your area have been entered.
A maximum of 5 extra codes can be
stored.
Your phone is now ready to use!
The answering machine is set with a
standard announcement.
¢ ¢
Base
§OK§§
~ (Enter number)
¢ ¢
Base
§OK§§