How To Access A Function; Using Codes; Tem Codes; Using A Function Key - Siemens HiPath 4000 Operating Instructions Manual

Step by Step
Consultation

Basic and enhanced-convenience functions

How to access a function

... using codes

qhh
Activating call forwarding
rhh
Activating call forwarding
qm
Entering a callback request
rm
Cancelling a callback request
When you activate or switch on a function, you always
begin by pressing the "star" key; when you deactivate,
switch off or cancel a function, you always begin by
pressing the "square" key.
As the examples show, codes can consist of either one
or two digits.
... using UK codes, Standard codes, Euro co-
des, special codes and system codes
System Support will inform you which codes apply to
your Hicom 300 H system.
The Appendix to these Operating Instructions contains
an overview of the possible codes.
If your optiPoint 500 entry does not have a "store" key,
storage of a call forwarding destination can be initiated
by lifting the handset and dialling the special code.
Replace the handset once you have entered the call
forwarding destination (! page 33).
Note that all these types of codes are included in the
descriptions in the central part of these Operating In-
structions.

... using a function key

You can activate directly those functions for which a key
has been programmed, for example:
Press the key. The function is executed
(if it is available in the particular situation).
Basic operating instructions
9