Class Of Service; Personal Identification Number (Pin); Hold, Transfer, Connect - Siemens ROLMphone 120 Series User Manual

Class of Service

Some of the phones in your system may be set up to use one class of
service (the primary) during normal business hours and then
automatically change to a more limited one (the secondary) during
non-business hours. If so, the features you can use may vary,
depending on the class of service in effect at the time.

Personal Identification Number (PIN)

A personal identification number (PIN) enables you to use another
phone within your company to gain access to the features of your own
phone. You may also need a PIN to be able to dial an outside number.
Ask your system administrator whether you have been assigned a PIN.
Also see "External Calls" on page 2-8, "PIN Authorization Features"
on page 7-11, and "Forced Authorization" on page 7-14.

Hold, Transfer, Connect

All ROLMphone 120/240/400 series phones have Hold, Transfer, and
Connect keys at the bottom of the faceplate.
The Hold key lets you temporarily hang up a line without
disconnecting the other party. (See "Hold" on page 2-14.)
The Transfer key lets you transfer a call to another extension or to
your company's operator. (See "Transfer" on page 2-19.)
The Transfer key also places any call you have in progress on
1
temporary hold
second party. (See "Feature Access Codes" on page 1-12.)
Finally, you can press the Transfer key to establish a conference call
including yourself, a party you have placed on consultation hold, and
a party you have dialed subsequently. (See "Consultation" on page
3-12.)
1
This temporary hold lasts only until you hang up or reconnect to the call, or
for a predetermined length of time. If you press the Transfer key while on a
call and then hang up, the call immediately rings back on your telephone.
1-10 ROLMphone 120/240/400 Series User Guide
and can be used to dial a feature access code or a