FE MONITOUCH V8 SERIES Reference: Additional Functions page 93

7.2 Panel Meter (Extended)
Customizing the Indicator and Scale
A desired bitmap file can be used for the part design (background, indicator and scale).
[Style], [Scale]
Customize
(background)
Select (indicator,
scale)
Width / Height
Aspect Ratio
Fixed
Panel Meter Center
Point
Base Point X
Base Point Y
Default
7-10
Background / Indicator
Choose a bitmap file in the desired folder.
The selected bitmap file is stored in ".\V-SFT-5\Parts\User".
Change the width and height of the imported bitmap image.
Check this box when changing the size of the bitmap image while fixing the
ratio between the width and height.
The coordinate values of the panel meter (circle) center point are displayed.
(0, 0)
W
Specify the X or Y coordinate value of the base point in dots.
The indicator turns around the point specified for [Panel Meter Center Point].
Indicator
Resets the X and Y coordinate values of the base point to those specified for
[Panel Meter Center Point].
Backgr
ound
Indicator
Red mark "×": base point
N
Panel meter center point
E
S
Base point
Scale
Scale
Specify the X and
Y coordinate
values of the base
point to adjust the
position of the
indicator or scale.