FE MONITOUCH V8 SERIES Reference: Additional Functions page 470

25.8 Message/Comment Transfer
Overview
If it is necessary to display, for example, different unit names on alarm messages depending on the
situation while using the same screen data, the message/comment transfer function can be used to
transfer a text file for messages only.
Messages can easily be edited in text format.
Example
When changing alarm messages in message GNo. 0:
Original screen data: Hakko.V8
Text file:
Line #1 Emergency stop
Line #1 Sensor error
Line #1 Preparation
Line #1 Stopped
F 1 F 2
SYSTEM
Hakko.V8
Screen
data
MSG00000.txt
Message
Emergency stop
Sensor error
Preparation
Stopped
F 1 F 2
SYSTEM
* Messages can also be changed by saving them in text format on the CF card. For more
information, refer to "14.2 Storing Message Data".
(Comments cannot be changed in this way.)
MSG00000.txt (Language 1, message GNo. 0)
<ALARM>
F 3 F 4 F 5 F 6 F 7
<ALARM>
F 3 F 4 F 5 F 6 F 7
25.8
Computer
Hakko
text
Store the screen data and text file
Transfer
in the same location.
(Example: desktop)
Message/Comment Transfer
25-41
25