FE MONITOUCH V8 SERIES Reference: Additional Functions page 214

16 FTP Server
Reading from and Writing to a File
"get" command (reading)
This command is used to read files stored in the CF card in the computer.
The file is read into the folder placed in the computer specified in the Command Prompt.
To be read into this location
16
"get" command:
<
get file to be read>
"put" command (writing)
This command is used to write files stored in the computer to the CF card.
"put" command:
<
put file in the PC (example: in drive e)> <file in the CF card (in drive c)>
16-15