Table of Contents
Advertisement
20
MES Interface Function
20.4 V-Server
V-Server
Hakko Electronics' V-Server is the software that enables accesses to databases. Once the V-Server is
installed on a computer, no configuration is needed.
Installation
1. Download the V-Server to your computer from the Hakko Electronics website at the URL given
below.
http://www.hakko-elec.co.jp/en/download/03tellus/index.html
2. Install the V-Server on the computer.
3. Start V-Server.
* The message that appears at start-up indicates that the V-Server is usable within one hour.
If you wish to use the V-Server without the limitation, please apply for the software's license and
obtain its password. For more information, refer to the TELLUS and V-Server manual.
20-26
Advertisement
Table of Contents
