Table of Contents
Advertisement
Log Viewer Screen
This section explains the log viewer screen.
Screen Configuration
A log viewer screen is displayed as the following.
5. Scroll bar
11. Return switch
Item
1. Roll-down switch
2. Roll-up switch
3. - block switch
4. + block switch
*
5. Scroll bar
6. Log file change switch (↑)
7. Log file change switch (↓)
8. Multi-overlap display switch
9. Multi-overlap display switch
*
10. Normal overlap
11. Return switch
10. Normal overlap
9. Multi-overlap display switch
Scrolls the screen down one row to show the previous data.
Scrolls the screen up one row to show the next data.
Scrolls the screen one page to show the previous data.
Scrolls the screen one page to show the next data.
Scrolls the screen in the specified direction.
When the log data in the SRAM area is displayed:
This switch does not work.
When the log data in the CF card is displayed:
Pressing this switch brings up the next new file.
When the file currently displayed is the newest one, the switch
shifts the screen to the log data in the SRAM area.
When the log data in the SRAM area is displayed:
Pressing this switch shifts the screen to the newest log file in the
CF card.
When the log data in the CF card is displayed:
Pressing this switch brings up the next older file.
Brings up the display item setting screen.
For more information, refer to "Display Item Setting Screen" on
page 21-19.
Brings up the display selection setting screen.
For more information, refer to "Display Selection Setting Screen"
on page 21-22.
Displays the contents of the selected log data on the overlap.
Returns you to the previously displayed screen.
21.2
Operation Log Viewer
1. Roll-down switch
5. Scroll bar
2. Roll-up switch
3. - block switch
6.Log file change
switch (↑)
7.Log file change
switch (↓)
4. + block switch
8. Multi-overlap display switch
Description
21
21-17
Advertisement
Table of Contents
