Table of Contents
Advertisement
Editing in a CSV File
The [Tag Database Edit] window data registered with the screen data in the V-SFT software can be
exported to a CSV-format file. The CSV-format file can be edited on the computer and then imported
to the screen data.
* CSV-format files that are copied from SIMATIC STEP 7-Micro/WIN (software for Siemens
S7-200) can also be imported. For more information on the procedure, refer to "Importing a
CSV File for Siemens S7-200" (page 24-11).
CSV File Editing
In the example below, changes are made to the data registered with ID No. 0 in the [Tag Database
Edit] window, by using Excel.
Tag: Frequency_setup
Address: D100
Comment: Inverter Port No. 1 → ON: RUN, OFF: STOP
1. Open the [Tag Database Edit] window. Click [File] → [Tag Export].
2. The [Save As] dialog is displayed.
Enter an arbitrary file name in the dialog. In the [Save as type] field, select [Csv File (*.csv)].
Click [Save].
3. The above step completes the export from the [Tag Database Edit] window to a CSV file. Open
the CSV file in Excel.
→ Run_status
→ D105
24
Tag
24
24-7
Advertisement
Table of Contents
